One request was just the beginning.
How MAKRA PRO emerged from a single development assignment – and how new challenges continue to drive the company’s growth today.
The assignment that started it all…
Before MAKRA PRO was founded, Matthias Krabel had already gained many years of professional experience. He had worked for twelve years as a developer and senior project manager in the automotive industry before taking on the role of managing director at a saddlery. During this time, he received an inquiry that would later become the starting point for MAKRA PRO. As part of the IAA 2017, he was asked to take on the development of a project. The surface contours and steel rods of the seats were already in place; the backrest and the corresponding foam, among other components, were to be developed.
Matthias brought the technical foundations from his training as a state-certified mechanical engineering technician. He had also already gained initial experience with CAD. He felt confident about taking on the development – but to be able to submit his own quote, he needed a registered business.
Thus, MAKRA PRO was founded on January 1, 2017. The name was pragmatically derived from Matthias Krabel and the suffix PRO for Professional, Prototyping, and Product Design. At that time, the plans were still manageable: MAKRA PRO was intended to run alongside his role as managing director.
But it did not stop with this single assignment. Further inquiries followed, production requirements increased, and within a short time, the small side business had developed into its own production operation. 18 Form 2 SLA printers were now available for MAKRA PRO – a scale no one had expected at the outset.
In August 2018, the company opened its first dedicated premises in Markt Taschendorf. Matthias continued to work as managing director during the day and looked after MAKRA PRO after hours. The more work that came in, the clearer it became that the two roles could not be carried out in parallel in the long term.
In January 2019, he therefore decided to focus entirely on MAKRA PRO and continue the company as a full-time business. Just two years earlier, Matthias had registered a business so that he could take on a single development assignment. Now there were 18 SLA printers in his own premises.
The original inquiry had long since grown into something much bigger.
Two challenges, two completely new business areas
In 2020, it became particularly clear in what unexpected directions the development of MAKRA PRO could take.
During the COVID-19 pandemic, the company first came into contact with medical technology through a single contact. MAKRA PRO developed brackets for medical applications, which were eventually supplied to clinics and university hospitals in Germany and Switzerland. This led to the creation of MAKRA MED.
Almost at the same time, a more everyday problem led in a completely different direction. Hans, a friend of Matthias, had a broken armrest on his tractor and needed a replacement. MAKRA PRO developed a suitable armrest, which Hans subsequently shared on social media. It quickly became apparent there that Hans was not alone with his problem: Other tractor drivers got in touch, new models were developed, and what had originally been a one-off custom-made part eventually evolved into ReeKOV.
Within the same year, MAKRA PRO’s paths had thus led into both medical technology and agriculture. Two areas that at first glance have little in common – except for their origin: Neither MAKRA MED nor ReeKOV began by looking for a new business area. In each case, it started with a challenge.
When the manufacturing process itself becomes part of the development
With MAKRA FLADE, another form of development work was added. This time it was not just about a component, but also about how it could be manufactured in the first place.
The starting point was the challenge of specifically shaping and structuring leather in three dimensions. To achieve this, MAKRA PRO developed a process that combines 3D-printed tools, foam, and leather, among other things. The technology was used, for example, in the interior of MORELO, a manufacturer of luxury motorhomes.
The right manufacturing method was not obvious from the outset. Instead of adapting an existing process to the application, the manufacturing process itself became part of the development work. This added another competence to the existing manufacturing capabilities: when necessary, to rethink not only the component, but also the way it is made.
From a one-man operation to a team
As the number of assignments and manufacturing capabilities grew, so did the company itself. Matthias had originally intended to run MAKRA PRO alone, but as the workload increased, this plan could no longer be sustained.
Julian became the first employee and brought customer communication and project management more strongly into the company. Marco followed as the first apprentice. Daniel, who had already supported Matthias with entrepreneurial questions, joined permanently on January 1, 2024 and took over commercial matters as well as the further development of structures and processes.
With Tobias, design and development were further expanded; Gabriel, Ute, and Ilayda added to the team in other areas. The company that Matthias had initially intended to run alone had thus gradually become a team with different areas of expertise.
Five times the space – for just four employees
On February 2, 2025, MAKRA PRO’s new location in Schlüsselfeld was officially opened. With around 250 square meters, the company had about five times its previous space at its disposal – with a team of just four employees at that time.
For Matthias, the decision was accompanied by a sense of respect. Some rooms were initially still empty, and not every area had yet found its final purpose. The additional space was therefore not created because every square meter at the previous location was already planned, but because MAKRA PRO needed room for further development .
During the move, the team, family, and other helpers all pitched in. Machines and equipment found their new place, new work areas were created, and the initially unusually large rooms gradually took shape.
Customers also noticed the change. The larger space created additional opportunities for manufacturing and development, while at the same time bringing in further assignments. What initially seemed generously sized for a team of four proved to be an important step for further growth.
What “Out of the Box” Means at MAKRA PRO
If you ask Daniel how he would describe MAKRA PRO in a few words, he gives three terms:
“Out of the box. Solution-oriented. Damn fast.”
Behind this is a way of working that has developed over the years from completely different requirements. Although additive manufacturing makes up a large part of the technical possibilities at MAKRA PRO, an inquiry does not begin with the question of which 3D printer should be used. What matters first is what a component needs to be able to do.
Material, geometry, quantity, surface finish, load-bearing capacity, and cost-effectiveness determine which manufacturing method makes sense. This could be SLS, SLA, or FFF, but it could also be a conventional manufacturing process or a combination of several technologies.
One example is investment casting: Here, the finished metal component is not additively manufactured. Instead, a lost model is created using 3D printing, which is then used in a conventional casting process. Additive and conventional manufacturing are not opposed to each other; rather, each takes over the part of the process for which it makes sense.
“Out of the box” therefore does not mean inventing something new at all costs for MAKRA PRO. It means remaining open to a different approach if it is technically or economically more sensible. Sometimes a different material is enough, sometimes a design adjustment, and sometimes the best approach lies in combining different processes.
For Daniel, this solution-oriented approach also includes speed. Short decision-making processes and direct communication enable quick reactions, while at the same time the customer should be able to rely on the commitments made. If during development it becomes clear that the originally intended approach is not sensible, this is addressed openly and a better alternative is sought together.
Daniel’s three terms therefore describe less a fixed range of services than the way and manner in which MAKRA PRO solves technical challenges.
Many industries – but not just any
Medical technology, agriculture, automotive, industry, or motorhomes: If you look only at the industries, MAKRA PRO is unusually broadly positioned.
Matthias sees a strength precisely in this diversity. Experiences from different areas do not remain separate. A material, a manufacturing principle, or a design idea from one application can suddenly provide a new approach to a completely different challenge.
The connecting element is therefore less the industries than the technical requirements behind them. Sometimes a spare part is missing that is no longer available, sometimes an existing design needs to be improved, a prototype developed, or a series production implemented. In other inquiries, it is initially only clear which problem needs to be solved – while the material, process, and concrete design are still open.
It is precisely this range that makes it difficult to define MAKRA PRO today by a single technology or industry.
So: Who is MAKRA PRO?
When Matthias registered MAKRA PRO on January 1, 2017, he initially wanted to implement a single development assignment and run the company alongside his main job. At that time, there was no talk of 18 SLA printers, MAKRA MED, ReeKOV, new manufacturing methods, a growing team, or later 250 square meters in Schlüsselfeld.
Today, all these milestones tell the story of how MAKRA PRO has grown. What the company means to Matthias nevertheless cannot be defined solely by machines, square meters, or technologies.
When he talks about MAKRA PRO, he ultimately comes back to the people: to a team that masters projects together, laughs together, sometimes disagrees, and nevertheless continues in the same direction. Especially for someone who originally wanted to run the company alone, this is a development that Matthias himself probably expected the least.
It started with a single inquiry. What would emerge from it could not have been known then. Today, behind it stands a team that works together on technical challenges and further develops MAKRA PRO with every new experience.
Perhaps this answers the question of who MAKRA PRO is better than any list of machines and services: the people who take on challenges, find solutions together, and never stop learning.